Case Lake Drilling Intersects 1.42% Li2O and 158 ppm Ta Over 19.17 m

2018-08-21 / @newswire

 

VANCOUVER, Aug. 21, 2018 /CNW/ - Power Metals Corp. ("Power Metals Corp." or the "Company") (TSX VENTURE:PWM)(FRANKFURT:OAA1)(OTC:PWRMF) is pleased to announce assays from the first 8 drill holes on the Company's current 15,000 m drill program at its Case Lake Property, 80 km east of Cochrane, Ontario. Drill hole PWM-18-84 intersected 1.42% Li2O and 158 ppm Ta over 19.17 m on the Main Dyke. The same hole also intersected 1.17% Li2O and 193 ppm Ta over 27.16 m. These two high-grade spodumene pegmatite intervals are separated by the quartz core. The purpose of this longitudinal drill hole was to test the continuity of the Main Dyke along strike and down dip. PWM-18-84 intersected continuous pegmatite from 2.0 - 128.25 m.

Power Metals Corp. (CNW Group/POWER METALS CORP)

Assay highlights on the Main Dyke include (Table 1):

  • 1.42 % Li2O and 158 ppm Ta over 19.17 m, PWM-18-84
  • 1.17 % Li2O and 193 ppm Ta over 27.16 m, PWM-18-84
  • 2.67 % Li2O over 0.42 m, PWM-18-84
  • 1.67 % Li2O and 157 ppm Ta over 10.20 m, PWM-18-92

The summer 2018 drill program also targeted the new spodumene dykes between the Main and South Dykes that were discovered at the end of the 2017 drill program (Power Metals press release dated Nov. 27, 2017). Four separate spodumene pegmatite dykes were intersected in drill holes PWM-18-85, 86 and 87 in close proximity to the Main Dyke. Thus, they will add to a future resource on the Main Dyke. The new dykes between the Main and South Dykes are open along strike.

Assay highlights on the new dykes include (Table 1):

  • 1.92 % Li2O over 1.05 m, PWM-18-85
  • 1.58 % Li2O over 0.67 m, PWM-18-86
  • 1.83 % Li2O over 0.97 m, PWM-18-87

Table 1 Assay highlights for summer 2018 drill program, holes PWM-18-84 to 92, Case Lake.









Drill Hole No.

Including

From (m)

To (m)

Interval (m)

Li2O (%)

Ta (ppm)

Zone

PWM-18-84


2.00

21.17

19.17

1.42

158

Main Dyke

PWM-18-84

Including

10.00

14.00

4.00

1.90

242

Main Dyke

PWM-18-84


54.84

82.00

27.16

1.17

193

Main Dyke

PWM-18-84

Including

69.03

73.02

3.99

2.05

144

Main Dyke

PWM-18-84

Including

79.00

79.42

0.42

2.67

57

Main Dyke









PWM-18-85


17.39

18.40

1.01

0.84

70

New Dykes, Main-South

PWM-18-85


52.30

53.85

1.56

1.24

74

New Dykes, Main-South

PWM-18-85


68.62

69.67

1.05

1.92

42

New Dykes, Main-South

PWM-18-85


74.60

75.35

0.75

0.87

101

New Dykes, Main-South









PWM-18-86


40.21

44.53

4.32

0.79

103

New Dykes, Main-South

PWM-18-86


63.63

64.30

0.67

1.58

48

New Dykes, Main-South









PWM-18-87


30.43

31.40

0.97

1.83

80

New Dykes, Main-South

PWM-18-87


34.50

35.86

0.59

1.08

92

New Dykes, Main-South









PWM-18-92


12.80

23.00

10.20

1.67

157

Main Dyke

PWM-18-92

Including

20.00

22.00

2.00

2.26

248

Main Dyke

PWM-18-92


31.10

33.00

1.90

1.21

45

Main Dyke

















 

Drill holes PWM-18-88 to 91 have no significant Li2O values.

This press release covers assays from drill holes PWM-18-84 to 92. Drilling is ongoing and assays from subsequent holes from this drill program will be released as they are received. Power Metals is planning to complete 15,000 m of drilling in summer/fall 2018 on the Case Lake Property. Drill hole collar locations are given in Table 2 and Figure 1.

Dr. Selway, VP of Exploration stated "Drill hole PWM-18-84 confirmed the continuity of the Main Dyke along strike for a future resource estimate. At the end of 2017, we thought that there were two spodumene dykes between Main and South Dykes. Our summer 2018 drill program has expanded the number of new dykes between Main and South Dykes from two to four dykes. Given the close proximity of these new dykes to the Main Dyke, they add to the future resource of the Main Dyke."

Figure 1 Summer 2018 drill hole collar locations on the Main Dykes and new dykes between Main and South Dykes. 

Table 2 Summer 2018 drill program drill hole collars holes PWM-18-84 to 92, Main Dyke, Case Lake.








Drill Hole No.

Easting (m)

Northing (m)

Elevation (m)

Azimuth

Dip

Depth (m)

PWM-18-84

578240

5431662

354

300

-45

203

PWM-18-85

578238

5431633

353

120

-45

275

PWM-18-86

578238

5431631

353

150

-50

303

PWM-18-87

578237

5431609

354

120

-45

69

PWM-18-88

578218

5431509

353

150

-45

116

PWM-18-89

578132

5431540

350

150

-45

126

PWM-18-90

578224

5431711

345

110

-45

132

PWM-18-91

578180

5431608

352

150

-45

155

PWM-18-92

578155

5431644

349

150

-45

122








 

Quality Control

The drill core was sampled so that 1 m of the Case Batholith tonalite host rock was sampled followed by 1 m long samples of the pegmatite dyke and 1 m of the Case Batholith. The sampling followed lithology boundaries so that only one lithology unit is within a sample, except for the < 20 cm pegmatite veins in tonalite which were merged into one sample. The drill core samples were delivered to SGS preparation lab in Cochrane by Power Metals' geologists. The core was then shipped to SGS analytical lab in Lakefield, Ontario which has ISO 17025 certification. Every 20 samples included one external quartz blank, one external lithium standard and one core duplicate. The ore grade Li2O% was prepared by sodium peroxide fusion with analysis by ICP-OES with a detection limit of 0.002 % Li2O. A QA/QC review of the standards and blanks for this drill program indicate that they passed and the drill core assays are accurate and not contaminated.

Case Lake

Case Lake Property is located in Steele and Case townships, 80 km east of Cochrane, NE Ontario close to the Ontario-Quebec border. The Case Lake pegmatite swarm consists of five spodumene dykes: North, Main, South, East and Northeast Dykes on the Henry Dome. Power Metals has an 80% interest with its 20% working interest partner MGX Minerals Inc.

Qualified Person

Julie Selway, Ph.D., P.Geo. supervised the preparation of the scientific and technical disclosure in this news release. Dr. Selway is the VP of Exploration for Power Metals and the Qualified Person ("QP") as defined by National Instrument 43-101. Dr. Selway is supervising the exploration program at Case Lake. Dr. Selway completed a Ph.D. on granitic pegmatites in 1999 and worked for 3 years as a pegmatite geoscientist for the Ontario Geological Survey. Dr. Selway also has twenty-three scientific journal articles on pegmatites. A National Instrument 43-101 report has been prepared on Case Lake Property and filed on July 18, 2017.

About Power Metals Corp.

Power Metals Corp. is a diversified Canadian mining company with a mandate to explore, develop and acquire high quality mining projects.  We are committed to building an arsenal of projects in both lithium and high-growth specialty metals and minerals. We see an unprecedented opportunity to supply the tremendous growth of the lithium battery and clean-technology industries.  Learn more at www.powermetalscorp.com

ON BEHALF OF THE BOARD,

Johnathan More, Chairman & Director

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the content of this news release.

No securities regulatory authority has either approved or disapproved of the contents of this news release. The securities being offered have not been, and will not be, registered under the United States Securities Act of 1933, as amended (the "U.S. Securities Act"), or any state securities laws, and may not be offered or sold in the United States, or to, or for the account or benefit of, a "U.S. person" (as defined in Regulation S of the U.S. Securities Act) unless pursuant to an exemption therefrom. This press release is for information purposes only and does not constitute an offer to sell or a solicitation of an offer to buy any securities of the Company in any jurisdiction.

Cautionary Note Regarding Forward-Looking Information

This press release contains forward-looking information based on current expectations, including the use of funds raised under the Offering.  These statements should not be read as guarantees of future performance or results. Such statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to be materially different from those implied by such statements. Although such statements are based on management's reasonable assumptions, Power Metals assumes no responsibility to update or revise forward-looking information to reflect new events or circumstances unless required by law.

Although the Company believes that the expectations and assumptions on which the forward-looking statements are based are reasonable, undue reliance should not be placed on the forward-looking statements because the Company can give no assurance that they will prove to be correct. Since forward-looking statements address future events and conditions, by their very nature they involve inherent risks and uncertainties. These statements speak only as of the date of this press release. Actual results could differ materially from those currently anticipated due to several factors and risks including various risk factors discussed in the Company's disclosure documents which can be found under the Company's profile on www.sedar.com.

This press release contains "forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E the Securities Exchange Act of 1934, as amended and such forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. The TSXV has neither reviewed nor approved the contents of this press release.

SOURCE POWER METALS CORP

View original content with multimedia: http://www.newswire.ca/en/releases/archive/August2018/21/c4821.html

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok